Industrial 8 Ports Gigabit Managed POE Switch with DC12V-57V Redundant Input

LINOVISIONSKU: POE-SW708GM-DC12V

Price:
Sale price€399,00
Stock:
In stock
SAME DAY SHIPPING
30 DAY RETURNS
24/7 CHINA + US GLOBAL TECH SUPPORT

Description

  • LAYER 2 MANAGED PoE SWITCH - Provides 8 * 10/100/1000Mbps Ethernet RJ-45 ports, 2 * 1G/2.5Gbps SFP uplink ports. Supports L2 management functions like VLAN, QoS, PoE Management and PoE port control, as well as automatic ONVIF cameras discovery. It can be managed via WEB, CLI or SNMP.
  • DC12~57V WIDE VOLTAGE INPUT - Supports 2 channels of DC12~57V redundant power inputs. It is designed for reliable PoE power output in solar power systems, vehicles or other applications that without AC power input.
  • RS485 SERIAL DATA INPUT - Provides RS485 serial port for IoT sensors integration or remote control, for example, humidity sensor, smoking sensor, light control, etc.
  • DC12/24V OUTPUTS - The DC Out supports 3 working modes through DIP switch: OFF/12V/24V.
  • Q-PoE and P-PoE - Its Quick PoE technology enables PoE power immediately upon switch startup, and the Perpetual PoE ensure non-stop PoE supplying even if the switch is restarting. They are unique features for many IoT devices that rely on non-interruption operation.
  • 90W BT PoE - All the PoE ports support IEEE802.3af/at PoE output, the first port can be configured as 90W BT PoE. Total PoE budget 240W @ 48V, or 120W @ 24V, or 60W @ 12V.
  • PoE WATCHDOG - Continuously monitoring PoE ports and automatically reboot PD device if it is freezing.

Application

  • Offer standard POE supply in solar power system (DC12V/DC18V/DC36V input)
  • RV/Vehicle/Truck/Bus system (DC12V input) where need POE ports
  • Suitable for UPS system (DC24V input) which need standard POE output
€399,00 EUR

LINOVISION Industrial 8 Ports Full Gigabit Managed POE Switch with DC12~57V Voltage Input, L2 Management, RS485 Serial Port, 12/24V DC Output, BT 90W POE Output,Q-PoE and P-PoE Without Interruption.

Connection Diagram

Outstanding Features

Package & Installation

Key Specification
Ethernet Ports 8*10/100/1000BASE-T PoE RJ-45(Auto-MDI/MDI-X)
2*1G/2.5GBASE-X SFP (The default value is 1G)
Management Ports 1*RJ-45 Console
1*Relay
Serial Port 1*RS-485
RS-485 signal: D+, D-
Check bit: None, Even, Odd, Space, Mark
Data bit: 5, 6, 7, 8bit
Stop bit: 1, 1.5, 2bit
Baud rate: 300~115200bps
Load capacity: RS-485 port supports 32-point polling environment (128-point could be customized)
Direction control: RS-485 adopts automatic data flow control technology
USB Port USB3.0
Auxiliary DC Output OFF/12V/24V@2A max
Init Button Short press to restart the device, Long press >5s to initialize the system
LED Indicators 2*PWR, power indicators
1*ALM, alarm indicator
2*SFP port indicators
Dimensions (W*D*H) 163mm*110mm*95.1mm
Net Weight 1.72kg
Input Voltage Support redundant power supply, Power 1 (Main): 12~57V DC, Power 2 (Backup): 12~57V DC
Power Consumption ≤250W (Full load including PoE & auxiliary DC)
Installation DIN-rail/Desktop/Wall mounted
Material Metal shell
Comparison

LINOVISION DC12V POE Switch Selection Guide

POE-Switch0504GD
Learn more >
POE-Switch1008-Solar
Learn more >
POE-SW708GM-DC12
Model POE-Switch0504GD POE-Switch1008-Solar POE-SW708GM-DC12V
Power Input Dual DC
Input: 12V~48V DC
Dual DC
Input: 12V~48V DC
Dual DC
Input: 12V~57V DC
Output 48V POE Standard 48V POE Standard 48V POE;
12/24V DC Output
Uplink Ports 1 Gigabit Ethernet Uplink 2 Gigabit SFP 2 Gigabit SFP
POE Ports 4 Gigabit PoE/POE+ Ports 8 Gigabit PoE/POE+ Ports 8 Gigabit PoE/POE+ Ports
POE++ Ports / / 1 * BT 90W Port
POE Budget 120W (DC24V/48V)
60W (DC12V)
240W (DC48V)
120W (DC24V)
80W (DC12V)
240W (DC48V)
120W (DC24V)
60W (DC12V)
L2 Management / /
PoE Port Management / /
Dimension 95x70x29 mm 159x110x46.5 mm 163x110x95.1 mm
Q&A

Customer Reviews

Based on 2 reviews
0%
(0)
100%
(2)
0%
(0)
0%
(0)
0%
(0)
N
Nick
Works, no documentation

This thing works pretty well for my RV setup with a bunch of PoE devices. You are going to want to buy a console cable because the ssh, telnet, et al. management methods they claim to have don actually work out of the box.

I couldn actually get my computer to connect to the management website because my security firewall was flagging and blocking it (maybe because it in Chinese?). After I disabled it I was able to connect, enable https, and then I was able to continue to connect from there.

There is zero documentation, although some similar managed switch models have documentation.

It comes with OpenWRT and a bunch of custom scrips for managing things like the reset button. After I got console access from the console port, which will log you into OpenWRT as root automatically, I disabled the OpenSSH service they had running (which for some reason was throwing errors trying to access the shadow file), and enabled dropbear for ssh access.

From there telnet magically started working. There some custom interface I not familiar with, but it resembles a Cisco switch config that you would telnet into.

A bunch of things you may want to lock down like telnet and SNMP v1&v2 with default community strings ublic and rivate.

I haven had any problems with the PoE, that been working great.

Device gets a little warm but not too hot, basically has a giant heat sync enclosure. Built very solid.

This device appears to be branded by Linovision, Hinovision, but there are multiple places in files saying Utepo Data Communcation Co., Ltd.

Suggestion to the seller / manufacturer, please provide on your website the documentation AND the firmware to flash the device!

Lastly, device came running OpenWRT designated_driver for mvebu64 hardware. _ユΖpkg update_ doesn_ユ_ work since OpenWRT has reorganized their files so the distfeed.conf doesn_ユ_ point to the correct place.

N
Nick
Works, no documentation

This thing works pretty well for my RV setup with a bunch of PoE devices. You are going to want to buy a console cable because the ssh, telnet, et al. management methods they claim to have don actually work out of the box.

I couldn actually get my computer to connect to the management website because my security firewall was flagging and blocking it (maybe because it in Chinese?). After I disabled it I was able to connect, enable https, and then I was able to continue to connect from there.

There is zero documentation, although some similar managed switch models have documentation.

It comes with OpenWRT and a bunch of custom scrips for managing things like the reset button. After I got console access from the console port, which will log you into OpenWRT as root automatically, I disabled the OpenSSH service they had running (which for some reason was throwing errors trying to access the shadow file), and enabled dropbear for ssh access.

From there telnet magically started working. There some custom interface I not familiar with, but it resembles a Cisco switch config that you would telnet into.

A bunch of things you may want to lock down like telnet and SNMP v1&v2 with default community strings ublic and rivate.

I haven had any problems with the PoE, that been working great.

Device gets a little warm but not too hot, basically has a giant heat sync enclosure. Built very solid.

This device appears to be branded by Linovision, Hinovision, but there are multiple places in files saying Utepo Data Communcation Co., Ltd.

Suggestion to the seller / manufacturer, please provide on your website the documentation AND the firmware to flash the device!

Lastly, device came running OpenWRT designated_driver for mvebu64 hardware. _ユΖpkg update_ doesn_ユ_ work since OpenWRT has reorganized their files so the distfeed.conf doesn_ユ_ point to the correct place.

You may also like

Recently viewed