Description
- INDUSTRIAL PoE PASSTHROUGH SWITCH - Powered by POE Switch or PoE Injector, passes PoE power to other PoE devices, such as VoIP phones and cameras. Also know as PoE Powered Switch. No local power adapter is required.
- 4CH BT90W PoE EXTENDER - 1xIEEE 802.3af/at/bt POE Input Port, max 90W; 4xIEEE 802.3at/af/bt PoE output Ports, 90W max for each port; Total POE budget is 75W max (90W POE input) or 120W max (DC input). Also provides 1*1000BASE-X SFP port and 1*Relay port.
- OPTIONAL DC POWER SUPPLY - Dual DC48~57V redundant power inputs: Power 1 (Main), Power 2 (Backup).
- 250m PoE EXTENSION- Extends PoE and Ethernet an additional 100 meters at Gigabit speed or 250 meters at 10Mbps in CCTV mode. Set the PoE Switch to CCTV mode through the DIP switch in the panel.
- STANDARD PoE - Unlike some software emulated PoE, this PoE Extender adopts hardware IEEE802.3af/at/bt PoE chipset and compatible to both Mode A and Mode B PD device. It follows PD Detection -> Classification Type -> Power On procedures to prevent standard PD device from damaging.
- INDUSTRIAL DESIGN - Fanless metal shell design; wide working temperature -20°C~65°C; DIN-rail/Wall mounted installation, 6kV surge immunity and 8kV ESD protection.
LINOVISION Industrial 4 Ports Gigabit BT90W PoE Passthrough Switch and PoE Extender, IEEE802.3af/at/bt, Optional DC Power Supply, SFP Port, DIN Rail PoE Powered Switch support 250m Long Distance PoE
Outstanding Features
Powered by POE
Powered by POE Switch or PoE lnjector, passes PoE power to other PoE devices, such as VolP phones and cameras. No local power adapter is required.
4 BT90W PoE Output Ports
The 1~4 ports are BT90W Ports, deliver up to 90W power per port, suitable for high-power POE devices. Total PoE budget is 75W max (90W PoE input) or 120W max (DC input).
Standard PoE
Unlike some software emulated PoE, this PoE Extender adopts hardware IEEE802.3af/at/bt PoE chipset and compatible to both Mode A and Mode B PD device. It follows PD Detection -> Classification Type ->Power On procedures to prevent standard PD device from damaging.
Optional DC Power Supply
Optional Dual DC 48~57V redundant power inputs: Power 1 (Main), Power 2 (Backup).
Extend PoE and Data Extra 100m
Connection Diagram
Model | POE-EXT9004G |
---|---|
Hardware Specifications | |
Downlink Port | 4*10/100/1000 BASE-T PoE++ RJ-45(Auto-MDI/MDI-X) |
Uplink Port | 1*10/100/1000 BASE-T RJ-45(Supports up to 90W PoE++ power input) 1*1000 BASE-X SFP |
Management Port | 1*Relay |
DIP Switch | CCTV mode: the transmission distance is extended up to 250m, but the rate is limited to 10Mbps. |
LED Indicators |
2*PWR, power indicators |
1*SFP port indicator | |
1*ALM, alarm indicator | |
Dimensions (W*D*H) | 6.30″ x 4.33″ x 1.73″ (160mm*110mm*44mm) |
Net Weight | 1.3lb (0.59kg) |
Input Power | PoE: IEEE 802.3af/at/bt standard, 90W max. Power 1 (Main): 48~57V DC, Power 2 (Backup): 48~57V DC |
Power Consumption | ≤130W (Full load including PoE) |
Material | Metal shell |
Installation | DIN-rail/Desktop/Wall mounted |
Switch Property | |
Standards | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3z, IEEE 802.3x, IEEE 802.1D, IEEE 802.3af, IEEE802.3at, IEEE 802.3bt |
Forwarding Modes | Store and forward |
MAC Table | 2k, support auto learning |
Switching Capacity | 12Gbps/non-blocking |
Packet Forwarding Rate | 8.928Mpps |
Port Buffer | 1MB |
Jumbo Frame | 9716 Bytes |
Power Supply | |
PoE Standard | IEEE 802.3af/at/bt (PD&PSE) |
PoE Power Supply Type | End-span |
PoE Pin Assignment | 3/6/4/5(+), 1/2/7/8(-) |
PoE Budget | 90W max for each port, 75W max for whole switch (PoE++ input), 120W max for whole switch (DC input) |
Alarm Signal Output by Relay | |
Alarm Signal Output by Relay | Support relay alarm for power off |
Reliability | |
ESD | IEC61000-4-2, Level 3: Contact Discharge: ±6kV, Air Discharge: ±8kV |
Surge | IEC61000-4-5, line to earth: 6kV |
Operating | -4℉~149℉ (-20℃~65℃), 5%~95% (Non-condensation) |
Storage | -40℉~185℉ (-40℃~85℃), 5%~95% (Non-condensation) |
Certifications | |
Certifications | CE, FCC |
LINOVISION PoE Extender Selection Guide
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
Learn more >
|
||
---|---|---|---|---|---|---|
Model | POE-EXT3001GP | POE-EXT3001LP (2 Pack) |
POE-EXT6002GP | POE-Extender02 | POE-EXT04 | POE-EXT9004G |
PoE Input | Max 30W | Max 30W | Max 90W | Max 30W | Max 60W | Max 90W |
PoE Output | 1 x 30W | 1 x 30W | 1 x 60W + 1 x 30W | 1 x 16W + 1 x 8W | 4 x 30W | 4 x 90W |
PoE Standard | IEEE802.3af/at | IEEE802.3af/at | IEEE802.3af/at/bt | IEEE802.3af/at | IEEE802.3af/at | IEEE802.3af/at/bt |
PoE Budget | 30W | 30W | 90W | 30W | 56W | 75W |
Extend Extra Transmission Distance | Max.300m (3 pack) |
Max.900m (2 pack) |
Max.100m (1 pack) |
Max.200m (2 pack) |
Max.100m (1 pack) |
Max.250m (1 pack) |
Ethernet Speed | Gigabit | 10/100Mbps | Gigabit | 10/100Mbps | Gigabit | 10/100/1000Mbps |
Waterproof | ✔ | ✔ | ✔ | / | / | / |
Installation Method | / | / | Wall-Mount | DIN-Rail/Wall-Mount | / | DIN-Rail/Wall-Mount |