Description
- 12V POE SPLITTER - Split IEEE802.3af/at POE to 10/100Mbps Data and DC12V 1A power outputs. Also comes with a DC 12V connectors for connecting devices of different DC port.
- WATERPROOF DESIGN- POE port design with waterproof plug, ensure POE Spitter operating safely outdoor. It is suitable for harsh working environments from -20℃ to 55℃.
- POE INPUT - Compliant to IEEE802.3af/at standard. Support POE Mode A and POE Mode B, Compatible with more POE Supply Devices. Wide voltage range enables connection with power supplier(poe switch/poe injector) of 44-57V DC voltage.
- SURGE PROTECTION - Reaching 4KV surge protection, the PoE ports owns the capacity to keep the PoE splitter cable from lightning strikes and other electrical surges, offering reliable performance even in some harsh environments.
- PLUG AND PLAY - No configuration is required.
- PACKAGE INCLUDED - 2 x Waterproof POE Splitter and 2 x DC connector.
- Suitable for CCTV surveillance system to power IP camera, other non-PoE devices like microphone, Wireless AP, VoIP Phone, etc.
LINOVISION DC12V Waterproof POE Splitter, 10/100Mbps Outdoor Power Over Ethernet Splitter, IEEE802.3af/at POE to DC Power Supply for Security Cameras,Wireless AP, VolP Phone
Outstanding Feature
DC Output with DC Connector
Comes with a DC12V connectors for connecting devices of different DC port；DC Connector can also power 2 DC12V devices at the same time
Waterproof Design
POE port design with waterproof plug, ensure POE Spitter operating safely outdoor.
Compatible with More POE Supply Devices
This Pot Splitter uses all 8 pins to transmit Pot Power, so it is compatible to both PoE Mode A and Poe Mode B, while some PoE Splitter are working with one mode of Pot Power Supply Devices.
Run DC Devices More Stable and Safer
4KV surge protection, Support short circuit, over current and over temperature protection, 3500V high-voltage isolation, the splitters could run your devices more stable and safer.
Application
Package & Installation
| Model | POE-SP01P |
|---|---|
| Hardware Specifications | |
| Interface |
PoE in Port: 1 x 10/100BASE-T Ethernet POE PD In PoE out port : 1x 10/100BASE-T Ethernet and 1 DC 12V Out |
| Ethernet Port | Ethernet port can support 10/100Base-TX auto-sensing, full/half duplex MDI/MDI-X self-adaption |
| Network Cable | 10BASE-T: Cat3,4,5 UTP(≤100 meter) 100BASE-TX: Cat5 or later UTP(≤100 meter) |
| Transmission Bandwidth (Rate) | 10/100Mbps |
| Dimension (L*W*H) | 90*20*20mm, cable length:≤120mm |
| Weight | 0.1kg |
| Power over Ethernet (PoE) Specifications | |
| PoE Standard | PoE in Port：IEEE 802.3af/at PoE PD |
| Input Voltage | 44-57VDC |
| Power Pin Assignment | 1/2 (+), 3/6 (-) & 4/5 (+), 7/8 (-) |
| Output Voltage | Default 12VDC± 1.5V, optional 5V,9V,24VDC Default DC5521 plug |
| Power Consumption | Standby<1W, Full Load<15W |
| Standards Conformance | |
| Standards Compliance | IEEE 802.3 Ethernet |
| IEEE 802.3u Fast Ethernet | |
| IEEE 802.3x Flow Control | |
| IEEE 802.3af Power over Ethernet | |
| IEEE 802.3at Power over Ethernet Plus | |
| Stability Testing | IEC 60068-2-32 (Free fall) |
| IEC 60068-2-27 (Shock) | |
| IEC 60068-2-6 (Vibration) | |
| Temperature | Operating: -20~55 degrees C |
| Storage: -40~75 degrees C | |
| Humidity | Operating: 5~90%, (non-condensing) |
| Storage: 5~90% (non-condensing) | |
| Regulatory Compliance | FCC Class A, CE Class A |
PoE Splitter Selection Guide
Learn more >
|
Learn more >
|
Learn more >
|
|
Learn more >
|
|
|---|---|---|---|---|---|
| Model | POE-Splitter1224 | POE-SP02BT | POE-SP01 (2 pack) | POE-SP01P (2 pack) | POE-SP01C (2 pack) |
| PoE Input | IEEE803.2af/at Max 30W |
IEEE802.3af/at/bt Max 90W |
IEEE803.2af/at Max 30W |
IEEE803.2af/at Max 30W |
IEEE803.2af Max 15W |
| Ethernet Output | 10/100/1000Mbps | 10M/100M/1000M/2.5G | 10/100Mbps | 10/100Mbps | 10/100Mbps |
| DC Output | DC12V or DC24V or POE 24V | DC24V and DC5/9/12/20V | DC12V | DC12V | USB-C |
| Waterproof | / | / | / | ✔ | / |
| Installation | Wall Mount/DIN Rail | Wall Mount/DIN Rail | / | / | / |