Mini 2 Ports POE Extender IEEE 802.3af/at POE Repeater Up to 300m

LINOVISIONSKU: POE-Extender02

Price:
Sale price€39,99
Stock:
In stock
SAME DAY SHIPPING
30 DAY RETURNS
24/7 CHINA + US GLOBAL TECH SUPPORT

Description

  • 2-PORT POE SPLITTER - Designed to supply POE power to two POE devices through one Cat5E/6 cable, and no power adapter is required. It is powered by 48V or 53V PoE Switch/POE NVR/PoE Injector/Mid-span. With this POE splitter, users can easily add extra POE device or non-POE device to existing cable without running a new network cable.
  • UP TO 300m POE + DATA EXTENTION - Extra 100m POE+Data transmission will be extended with one POE Extender. And it supports two levels cascade deployment, therefore total 300m POE + Data transmission is provided. (The 2nd POE Extender’s POE Input should be connected to the 1st POE Extender’s Out port, not Camera port).
  • COMPLIANT TO IEEE802.3AF/AT STANDARD - Works with all standard IEEE802.3af/at POE Switches/POE injectors/POE NVRs. And the POE outputs supply power to standard POE devices, like POE IP camera/IP phone/IP speaker. Noted: The CAMERA Port supports max 8W power consumption and the OUT Port supports max 15W. The max bandwidth is 100Mbps. As the distance increases, the power and the bandwidth will decrease.
  • EASY TO CONFIGURE IP CAMERA ON SITE - By connecting it to an existing PoE cable, installers can use laptop or CCTV Tester to easily adjust camera angle and configure IP.
  • PLUG-N-PLAY INSTALLATION - No configuration or setup is required. With compact dimension, enough to fit it many junction boxes or outdoor waterproof enclosures.

Application

  • POE passthrough switch, poe splitter, Run one network cable to connect two POE or non-POE devices.
  • Extend the power+data transmission distance, up to 300m totally. 
Related Item to Consider

One Port Gigabit Outdoor PoE Extender, Waterproof PoE Ethernet Repeater

€49,99 EUR

BT90W Outdoor PoE Extender, Gigabit PoE Repeater with Two PoE Outputs

€89,99 EUR

4 Port Gigabit POE Extender with 60W POE Input, 1 in 4 Out POE Repeater

€49,99 EUR

800m Super Long Range PoE + Ethernet Data Extender over Cat5 Cable (2 Pack)

€79,00 EUR

Industrial 4 Ports Gigabit BT90W PoE Passthrough Switch and PoE Extender

€95,99 EUR
€39,99 EUR

Power over Ethernet (PoE) enables the delivery of ethernet data and power simultaneously over a single Cat5 or Cat6 network cable. POE technology makes the network devices deployment much easier and eliminate the requirement of electrical regulations. Therefore, more and more devices are becoming IP based and PoE Powered.

One of main limitations of PoE is the 100 meters (328 feet) transmission distance between PSE (Power sourcing equipment) and PD (Powered Devices), regardless of the PoE power. Now this limitation can be broken by PoE Extenders. 

Linovision PoE Extenders feature plug-n-play operation and two extension ports.

Three main benefits of using Linovision two ports PoE Extenders:

  • Extend Distance
    Each Linovision PoE Extender can extend another 100 meters of PoE transmission. And it supports cascade deployment. For example, it will support 400 meters of PoE transmission when using 3 levels of cascade deployment.

  • Extra PoE Ports
    This is pretty useful when there are more than one PoE device in a location, this eliminates the expense to run another ethernet cable. More PoE ports will be available when using cascade deployment. POE extender is also called by POE passthrough switch or poe splitter.
     
  • Plug-n-Play
    There is no configuration is required and no power supply is required at the device side.

Applications

1. Using POE-Extender02 to provide power to two IEE802.3af PoE IP Cameras

2. PoE-Extend-&-Split-to-Two-Network-Devices

3. Cascae deployment

4. PoE Extend & Split to Two PoE/ non-PoE DC12V Devices

5. Easy-to-configure-IP-Camera-on-Site

Key Specification
Model POE-Extender02
Ethernet Port 1*10/100 Base-T PoE power receiving port
1*10/100 Base-T PoE power supply port, supply power for the next extender
1*10/100 Base-T PoE power supply port, supply power for IPC
Transmission Distance Cooperate with POE-Injector60W, able to cascade level two extender, connect to 3 IPC (level one extender connects to 1 IPC, the OUT port of level two extender and CAMERA port connect to 1 IPC respectively, total power consumption <=25W), transmission distance is 300m
Power Consumption <=3W
Application Humidity 10%~90%
Working Temperature ﹣30°C~65°C
Weight 57g
Dimension(W×D×H) 79mm×52mm×23mm
Comparison

LINOVISION PoE Extender Selection Guide

POE-EXT3001GP
Learn more >
POE-EXT3001LP(2 Pack)
Learn more >
POE-EXT6002GP
Learn more >
POE-Extender02  POE-EXT04
Learn more >
 POE-EXT04
Learn more >
Model POE-EXT3001GP POE-EXT3001LP
(2 Pack)
POE-EXT6002GP POE-Extender02 POE-EXT04 POE-EXT9004G
PoE Input Max 30W Max 30W Max 90W Max 30W Max 60W Max 90W
PoE Output 1 x 30W 1 x 30W 1 x 60W + 1 x 30W 1 x 16W + 1 x 8W 4 x 30W 4 x 90W
PoE Standard IEEE802.3af/at IEEE802.3af/at IEEE802.3af/at/bt IEEE802.3af/at IEEE802.3af/at IEEE802.3af/at/bt
PoE Budget 30W 30W 90W 30W 56W 75W
Extend Extra Transmission Distance Max.300m
(3 pack)
Max.900m
(2 pack)
Max.100m
(1 pack)
Max.200m
(2 pack)
Max.100m
(1 pack)
Max.250m
(1 pack)
Ethernet Speed Gigabit 10/100Mbps Gigabit 10/100Mbps Gigabit 10/100/1000Mbps
Waterproof / / /
Installation Method / / Wall-Mount DIN-Rail/Wall-Mount / DIN-Rail/Wall-Mount
Q&A
Q.Can this be used for 2 computers instead of 2 cameras? And what are the speeds of this device?
A.

Yes, this can be used for 2 computers and the maxim speed of the input port is 100M. Please be informed that the total speeds of two outputport can’t exceed the speed of the input port. And the speed will be influenced by the transmission distance, the longer distance it is, the slower speed it provides.

Q.Can this be installed outdoor?
A.

This POE Extender is not waterproof. We have 2 waterproof versions, one is the same product with a waterproof case,  POE-Extender02WP.
The other is the product itself with a waterproof design,POE-Extender02GP(90W).

Q.Will this work with receiving power from a non-passive poe switch? (802.3af / ieee802.3at) will this power a passive device (not 802.3af/ieee802.3a)?
A.

Yes, 'paasive' here means you don't need additional power supplier to power this product separately, but whole system need be powered. This product can work with both poe devices(as poe extender/splitter) and non-poe devices(as ethernet splitter/extender). And please be noted that each port of this product supports max 100Mbps. 

Q.Will this passive splitter work with a 24v poe injector and 24v poe devices? or only with ~50 volts?
A.

This POE splitter can't work with 24V POE injector. It's recommended to use poe injector of 48-53V. And please make sure that the total power consumption of two POE output is less than the POE power input (with deduction of 3W power consumption by POE extender itself). 

Q.What is the safe operating temperature range for this device?
A.

The operating temperature for this product is -30°C to 65°C (-22 °F to 149 °F).

Q.Does this extender need an addition power supply?
A.

No, it does not require local power supply. This POE extender is powered by PoE devices (48V or 53V PoE Switch/PoE NVR/PoE Injector/Mid-span). it is working well.

Q.Do I need two of these to extend cat6 for 600 feet?
A.

Yes, the POE extender supports cascade deployment, max 300m (1000ft) transmission and running one cable to support 3 IP devices, but 60W POE injector is required and IP camera power consumption should be less than 8W.

Q.What is the load capacity of POE device that connected to this POE extender?
A.

Basically, the load capability depends on the POE supply device, the total power consumption of two POE output is less than the POE power input. For example, if the POE supply unit is a 30W POE injector, then the total output power of this POE extender is less than 27W (with deduction of 3W power consumption by POE extender itself), the longer the transmission distance, the lower power output from POE extender. We recommend to use 60W High POE injector to connect to this POE extender.

Resources
Datasheet(1)
User Manual(1)

Customer Reviews

Based on 58 reviews
86%
(50)
7%
(4)
3%
(2)
3%
(2)
0%
(0)
R
RGB
PoE powered and provides 2 switched Ethernet ports.

Turns a single PoE jack into two. Running a Unifi PoE camera off one jack and a Fire TV cube off the other without any issues.

Note: this is powered from your main PoE switch, otherwise you would need a PoE injector to make it run.

A
Andrew L.
Plugged in and works. Exactly what I was looking for!

Didn't want to run another cable for a POE camera that I will be mounting next to another POE camera that is already installed.

I plugged this device into my POE NVR (Dahua), plugged two cameras into it as a test and it worked. Cameras booted up and are functioning seamlessly with the NVR.

The DIN rail connector is a nice touch but not applicable to my install. I will be using the two mounting holes (hardware included) to install it inside a junction box.

Only potential issue is that the unit gets slightly warm to the touch. Hardly anything noticeable but it will ultimately be installed inside a waterproof junction box that is mounted outside in Cuba. The heat _may_ be an issue over time but I have no way of confirming that right now. The only reason I gave 4 stars and not 5.

Definitely a money- and time-saver. I highly recommend this for 2 POE devices (my cameras run max. 5W each) on one cable. My install doesn't require an extension beyond the 100m limit so I can't speak to that.

Would definitely recommend.

A
Andrew L.
Plugged in and works. Exactly what I was looking for!

Didn't want to run another cable for a POE camera that I will be mounting next to another POE camera that is already installed.

I plugged this device into my POE NVR (Dahua), plugged two cameras into it as a test and it worked. Cameras booted up and are functioning seamlessly with the NVR.

The DIN rail connector is a nice touch but not applicable to my install. I will be using the two mounting holes (hardware included) to install it inside a junction box.

Only potential issue is that the unit gets slightly warm to the touch. Hardly anything noticeable but it will ultimately be installed inside a waterproof junction box that is mounted outside in Cuba. The heat _may_ be an issue over time but I have no way of confirming that right now. The only reason I gave 4 stars and not 5.

Definitely a money- and time-saver. I highly recommend this for 2 POE devices (my cameras run max. 5W each) on one cable. My install doesn't require an extension beyond the 100m limit so I can't speak to that.

Would definitely recommend.

R
RGB
PoE powered and provides 2 switched Ethernet ports.

Turns a single PoE jack into two. Running a Unifi PoE camera off one jack and a Fire TV cube off the other without any issues.

Note: this is powered from your main PoE switch, otherwise you would need a PoE injector to make it run.

A
Akash Patel
Awesome

Works as intended

You may also like

Recently viewed